MVR is the abbreviation for Mechanical Vapor Compression. Nickname: Mechanical steam recompression evaporator is a type of evaporator that utilizes the secondary steam generated in the evaporator. After being compressed by the compressor, the pressure and temperature increase, and the enthalpy increases. It is then sent to the heating chamber of the evaporator for circulation as heating steam. MVR is a technology that reuses the heat generated by its own secondary steam to reduce the demand for external energy.Type of MVR evaporator:MVR falling film evaporator, MVR rising film evaporator, MVR forced circulation evaporator, etc. When the thin secondary steam is compressed by volume, its temperature will increase accordingly, achieving the transformation of low-temperature and low-pressure steam into high-temperature and high-pressure steam, which can serve as a heat source to reheat the raw liquid that needs to be evaporated, thus achieving the goal of recycling and utilizing steam; Due to the fact that the compression of this volume is achieved through a compressor, it is called MVR. Currently, MVR evaporators are increasingly being used in areas with higher steam prices and lower electricity prices. The larger the evaporation capacity, the more advantageous it is for MVR.
Working principle and application characteristics
1.MVR falling film evaporator
Working principle of MVR falling film evaporator:
The raw liquid of the material is added from the tube box on the heat exchanger, and is distributed to each heat exchange tube through a liquid distributor. A uniform liquid film is formed along the inner wall of the heat exchange tube, and the liquid film inside the tube is heated by the heating steam on the shell side during the downward flow process, rapidly flowing down while boiling and evaporating. The material at the bottom of the heat exchange tube becomes concentrated liquid and secondary steam. The concentrated liquid falls into the lower pipe box, and the secondary steam enters the gas-liquid separator. The liquid droplets carried by the secondary steam in the gas-liquid separator are removed, and the pure secondary steam is transported from the separator to the compressor. The compressor compresses the secondary steam and sends it as heating steam to the shell side of the heat exchanger for use as a heat source in the evaporator. Realize continuous evaporation process.
Characteristics of MVR falling film evaporator:
1. High heat exchange efficiency;
2. Small footprint;
3. The material stays for a short period of time, which is not easy to cause material deterioration;
4. Suitable for materials with higher viscosity.
Application range of MVR falling film evaporator:
MVR falling film evaporator is suitable for materials with high evaporation capacity and low concentration. It can achieve the pre concentration process of MVR evaporation crystallization process, and can evaporate materials with high viscosity. It is especially suitable for heat sensitive materials, but not suitable for processing materials with crystallization.
2.MVR rising film evaporator
Working principle of MVR rising film evaporator:
After preheating, the raw material liquid enters the evaporator from the bottom, and the heated steam condenses outside the pipe. After being heated, the solution rapidly vaporizes, and the generated secondary steam rises at a high speed inside the tube, pulling the feed liquid against the inner wall of the tube into a thin film and allowing it to continue to evaporate. The vapor liquid is separated in the top separator. The compressor compresses the secondary steam and sends it as heating steam to the shell side of the heat exchanger for use as a heat source in the evaporator. Realize continuous evaporation process.
Characteristics of MVR rising film evaporator:
1. High heat exchange efficiency;
2. Low energy consumption;
3. The equipment has certain requirements for the height of the factory building.
Scope of application of MVR rising film evaporator:
The rising film evaporator is suitable for solutions with large evaporation capacity, limited plant height, heat sensitivity and foam formation, not for solutions with high viscosity, easy scaling or crystallization.
3.MVR forced circulation evaporator
Working principle of MVR forced circulation evaporator:
The preheated material is fed from the feed inlet. When the liquid level reaches a certain height, the forced circulation pump is turned on, and the material begins to circulate in the system. The material flows through the tube side of the tubular heat exchanger and exchanges heat with the steam in the shell side for heating. The heated material enters the evaporation chamber, which is a negative pressure environment where the material undergoes flash evaporation. The generated secondary steam enters the compressor after gas-liquid separation through the separator in the upper part of the evaporation chamber. After being heated by the compressor, the secondary steam enters the shell side of the evaporator again for heat exchange with the materials in the heat exchanger tube side. After the material in the system reaches saturation, crystals begin to precipitate.
After the system detects that the material meets the discharge conditions, it is discharged by the discharge pump for subsequent operations such as thickening, centrifugal separation, drying, and packaging.
Composition of forced circulation evaporator:
The forced circulation evaporator consists of a heating chamber, an evaporation crystallization chamber, a condenser, a circulation pump, a vacuum and drainage system, a gas-liquid separation chamber, a secondary steam flash tank, a salt separator, an operating platform, detection instruments, electrical instrument control cabinets, valves, and pipeline systems.
Characteristics of MVR forced circulation evaporator:
1. The forced circulation evaporator has a wide range of adaptability for handling material characteristics.
2. The forced circulation evaporator has a high degree of anti scaling.
3. Good gas-liquid separation effect.
4. The entire equipment is compact and occupies a small area.
5. High degree of automation.
Application field of forced circulation evaporator:
1. Suitable for the treatment of high salt, high COD, high boiling point wastewater and pharmaceutical intermediate high salt wastewater in chemical and pharmaceutical factories.
2. Traditional salt production industries such as vacuum salt production, well salt mining, and salt nitrate separation.
3. Easy to scale, with crystalline materials
4. Equipped with membrane reactors, biological treatment processes, chemical treatment processes, etc., to achieve "zero discharge" of chemical wastewater, biological wastewater, etc. and the recycling and utilization of solid waste.
4.Skid mounted forced circulation MVR evaporator
4.Skid mounted modular MVR evaporator:
The traditional MVR evaporation system occupies a large space, requires a large amount of installation and construction work, and has a long installation cycle. For enterprises that need to suspend their existing production lines for expansion, or for enterprises that are sensitive to on-site installation cycles and labor costs, shortening the on-site installation and construction cycle can significantly reduce economic costs.
Based on this, Jiangsu Huigang Company, with its own research and development capabilities, has developed an integrated and modular MVR evaporation system from various aspects such as process systems, structural design, and automation control; The process module has achieved skidization and factory manufacturing, and the production and assembly of the skid-mounted equipment are completed in the factory. The on-site installation workload is small, and only the interface pipelines and external electrical connections need to be completed to work. Its functional components are integrated into a single base, which can facilitate overall migration. The reuse rate of the equipment is over 95%.
Applicable wastewater types:
Lithium battery industry wastewater, landfill leachate, coal chemical wastewater, printing and dyeing wastewater, etc. can be used in conjunction with crystallizers and centrifuges. When the salt content of the wastewater is high, the BOCE type modular MVR evaporator can be selected. This modular evaporator can freely combine thick kettle and centrifuge modules. After the wastewater evaporates and crystallizes, the crystals precipitate and are discharged to the centrifugal crystallization module. The centrifugal crystallization module performs solid-liquid separation, and the mother liquor returns to the MVR evaporator for further evaporation. As evaporation progresses, the organic matter, impurities, and hardness inside the evaporator will accumulate. Therefore, every once in a while, the evaporator empties the mother liquor for drying treatment, which reduces the investment and operating costs of this process.
Packaging and transportation
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Company Profile
Jiangsu Huigang Technology, an international technology-oriented manufacturing&engineering group company,specialized in gloves making equipment,water treatment equipment,various evaporator equipment meanwhile providing services of project consulting, engineering design, construction supervision, project management and general contracting.
We have strong technical support. There are more than 300 personnel in Huigang Technology, of which 40% are professional technicians. Around 10 are Middle and senior engineer and over 30 personnel own professional registered certificates.
After all these years, We adhere to the principle of "Quality first, service-orientation" and try to provide the best products and service to more than 10 countries in the world, especially in Africa,Asia, Middle East,and South America, which earns us a great reputation. We warmly welcome you to our company and create brilliance together!
FAQ
1. Q: How about the quality?
A: We have one year quality guarantee, our customers have used our machines for a long time.
2.Q: How should I order?
A: Choose the products what you like, or send us your requirement, our engineer can make a project and quotation for you.(After confirming all details and signing the contract, you can do deposit or make the LC, then we produce it ,We deliver these machines by ship according to our agreement. We send the documents to you after shipment).
3.Q: What about payment?
A: T/T and Irrevocable LC payment can be accept.
4.Q: Lead time?
A: 2-3 weeks(depends on the style of the machine).
5.Q: How can I get to you factory?
A: We are located in Jangsu China, which is nearby Shanghai, you can take the flight to Shanghai airport,We will arrange the driver to pick you up.You are welcome to visit our factory.
Our products are welcomed in the Mid East,Eastern Asia, Africa and the united states, and domestic with high quality low price and top-grade services. If you have any quostions, please feel free to contact with us at any time.
){kind=link}