Product Features:
1. Efficient defoaming: The system is equipped with efficient defoaming device to avoid material foam entrainment leading to material loss.
2. Automatic control: Adopting a liquid level automatic control system, automatic feeding and automatic discharge of condensate.
3. Long service life of the overall tube plate: The heater, preheater, and condenser tube plates use integral tube plates to extend the service life of the equipment.
4. Energy saving and consumption reduction: The discharge adopts a separation device to increase the crystal content of the discharge, obtain most of the crystals after separation, have little reflux of the mother liquor, require less heat energy to be consumed again, and save energy.
Technical parameters of multi effect evaporator:
1. Product evaporation capacity: 0.2t/h-60t/h
2. Evaporation temperature: 40 ºC -100 ºC
3. Power consumption per ton of water evaporated: 8-15kw
4. Feed concentration: No requirement
5. Solid content in discharge: can be directly evaporated to crystallization
6. Heat exchange components: can be designed as plate, tube, and other evaporators
Working principle of multi effect evaporator:
The principle of a multi effect evaporator is to use fresh steam to drive the first effect to produce evaporation, and then use the secondary steam generated by the first effect to drive the next effect evaporation, in order to achieve the goal of energy conservation. In order to reduce the consumption of primary steam, the secondary steam generated in production is introduced into two evaporators for heating steam. The secondary steam generated by the two evaporators can also be introduced into three evaporators for heating steam, and each evaporator is called a first effect, and so on. In this way, several evaporators are operated in series to form a multi effect evaporator.
Composition of the multi effect evaporator system:
It is composed of various heaters, evaporation separators, condensers (mixed or surface type), forced circulation pumps, various material and liquid transfer pumps, vacuum pumps, condensate pumps, operating platforms, electrical instrument control cabinets, and pipeline valves within the boundary.
Application field of multi effect evaporator:
Single effect, double effect, triple effect, and multi effect forced circulation evaporators are suitable for evaporation and concentration in industries such as chemical, food, pharmaceutical, environmental engineering, waste liquid evaporation and recovery, with scaling, crystallinity, thermal sensitivity (low temperature), high concentration, high viscosity, and insoluble solids. Widely used as an evaporation concentrate for water or organic solvent solutions in industries such as medicine, food, chemical, and light industry, and can be widely used for waste liquid treatment in these industries. Especially suitable for heat sensitive materials, evaporators operate continuously under vacuum and low temperature conditions, with high evaporation capacity, energy saving and consumption reduction, low operating costs, and the ability to ensure the invariance of materials during the evaporation process.
The main features of a multi effect evaporator are:
1. Efficient defoaming: The system is equipped with efficient defoaming device to avoid material foam entrainment leading to material loss.
2. Automatic control: Adopting a liquid level automatic control system, automatic feeding and automatic discharge of condensate.
3. Long service life of the overall tube plate: The heater, preheater, and condenser tube plates use integral tube plates to extend the service life of the equipment.
4. Energy saving and consumption reduction: The discharge adopts a separation device to increase the crystal content of the discharge, obtain most of the crystals after separation, have little reflux of the mother liquor, require less heat energy to be consumed again, and save energy.
Multi effect evaporators have evolved from primitive evaporators to single effect, double effect, three effect, four effect, or more effect evaporators, all aimed at gradually reducing energy consumption.
Single effect evaporation consumes 1.1 to 1.2 tons of steam per ton of water, double effect evaporation consumes 0.6 to 0.7 tons of steam per ton of water, triple effect evaporation consumes 0.37 to 0.46 tons of steam per ton of water, four effect evaporation consumes 0.3 to 0.35 tons of steam per ton of water, and five effect evaporation consumes 0.24 to 0.3 tons of steam per ton of water.
Multi effect evaporators can adopt various forms such as forced circulation, natural circulation, falling film, rising film, and plate type evaporators, as well as various combinations to optimize the process flow.
Packaging and transportation
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
Company Profile
Jiangsu Huigang Technology, an international technology-oriented manufacturing&engineering group company,specialized in gloves making equipment,water treatment equipment,various evaporator equipment meanwhile providing services of project consulting, engineering design, construction supervision, project management and general contracting.
We have strong technical support. There are more than 300 personnel in Huigang Technology, of which 40% are professional technicians. Around 10 are Middle and senior engineer and over 30 personnel own professional registered certificates.
After all these years, We adhere to the principle of "Quality first, service-orientation" and try to provide the best products and service to more than 10 countries in the world, especially in Africa,Asia, Middle East,and South America, which earns us a great reputation. We warmly welcome you to our company and create brilliance together!
FAQ
1. Q: How about the quality?
A: We have one year quality guarantee, our customers have used our machines for a long time.
2.Q: How should I order?
A: Choose the products what you like, or send us your requirement, our engineer can make a project and quotation for you.(After confirming all details and signing the contract, you can do deposit or make the LC, then we produce it ,We deliver these machines by ship according to our agreement. We send the documents to you after shipment).
3.Q: What about payment?
A: T/T and Irrevocable LC payment can be accept.
4.Q: Lead time?
A: 2-3 weeks(depends on the style of the machine).
5.Q: How can I get to you factory?
A: We are located in Jangsu China, which is nearby Shanghai, you can take the flight to Shanghai airport,We will arrange the driver to pick you up.You are welcome to visit our factory.
Our products are welcomed in the Mid East,Eastern Asia, Africa and the united states, and domestic with high quality low price and top-grade services. If you have any quostions, please feel free to contact with us at any time.
){kind=link}